ASTM 규격집(핸드북) Section 15-1권
ASTM Volume 15.01: Refractories, Activated Carbon; Advanced Ceramics(ASTM Volume 15.01: 내화물, 활성탄; 고급 세라믹스)
도서 내 규격수 : 155종
발행월 : 3월
세부목록 :
C1054-18 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1070-01(2020) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
C108-46(2018) Standard Symbols for Heat Transmission
C1099-07(2019) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1113/C1113M-09(2019) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C113-14(2019) Standard Test Method for Reheat Change of Refractory Brick
C1145-19 Standard Terminology of Advanced Ceramics
C1161-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1171-16(2022) Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1190-18(2022) Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1198-20 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
C1211-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1223-19 Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1239-13(2018) Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
C1259-21 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1273-18 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1274-12(2020) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
C1275-18 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
C1291-18 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
C1292-22 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1322-15(2019) Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
C1323-22 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1326-13(2023) Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327-15(2019) Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1337-17 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
C133-97(2021) Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C1341-13(2018) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C134-95(2016) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C1358-18 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
C1359-18e1 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
C135-96(2022) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C1360-17 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1361-10(2019) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1366-19 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1368-18 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
C1407-98(2016) Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1419-14(2020) Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
C1421-18 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
C1424-15(2019) Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
C1425-19 Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
C1445-13(2018) Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
C1446-19 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
C1465-08(2019) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
C1468-19a Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
C1469-22 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
C1470-20 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
C1494-13(2018) Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
C1495-16(2023) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
C1525-18 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
C1547-02(2022) Standard Classification for Fusion-Cast Refractory Blocks and Shapes
C1548-02(2020) Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio of Refractory Materials by Impulse Excitation of Vibration
C1557-20 Standard Test Method for Tensile Strength and Young's Modulus of Fibers
C155-97(2022) Standard Classification of Insulating Firebrick
C1576-05(2017) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
C16-03(2018) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
C1624-22 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
C1655-06(2022) Standard Classification of Fireclay and High-Alumina Mortars
C1656-13(2018) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
C1674-16 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
C1678-21 Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
C1683-10(2019) Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
C1730-17(2022) Standard Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
C1773-21 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
C1783-15 Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
C179-14(2019) Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C1793-15 Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
C181-11(2018) Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
C1819-21 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
C182-19 Standard Test Method for Thermal Conductivity of Insulating Firebrick
C1834-16 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
C1835-16 Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures
C1836-16 Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures
C1862-17 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
C1863-18 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
C1869-18 Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
C198-09(2019) Standard Test Method for Cold Bonding Strength of Refractory Mortar
C199-22 Standard Test Method for Pier Test for Refractory Mortars
C20-00(2022) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C201-93(2019)e1 Standard Test Method for Thermal Conductivity of Refractories
C202-19 Standard Test Method for Thermal Conductivity of Refractory Brick
C210-95(2019) Standard Test Method for Reheat Change of Insulating Firebrick
C24-09(2022) Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
C27-98(2022) Standard Classification of Fireclay and High-Alumina Refractory Brick
C288-20 Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C357-07(2022)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
C401-12(2022) Standard Classification of Alumina and Alumina-Silicate Castable Refractories
C416-97(2022) Standard Classification of Silica Refractory Brick
C417-21 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C454-10(2022) Standard Test Method for Disintegration of Carbon Refractories by Alkali
C455-07(2022) Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
C456-18 Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
C467-14(2023) Standard Classification of Mullite Refractories
C492-92(2017)e1 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C544-18 Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
C545-97(2022) Standard Classification of Zircon Refractories
C577-19 Standard Test Method for Permeability of Refractories
C583-15(2021) Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C604-18 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C607-88(2016) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
C621-09(2022) Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C673-97(2022) Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C704/C704M-15(2022)e1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C71-12(2018) Standard Terminology Relating to Refractories
C767-20 Standard Test Method for Thermal Conductivity of Carbon Refractories
C830-00(2016) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C831-18 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C832-21 Standard Test Method for Measuring Thermal Expansion and Creep of Refractories Under Load
C860-15(2019) Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C861-93(2020) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C862-16(2020) Standard Practice for Preparing Refractory Concrete Specimens by Casting
C863-00(2022) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C865-22 Standard Practice for Firing Refractory Concrete Specimens
C874-20 Standard Test Method for Rotary Slag Testing of Refractory Materials
C885-87(2020) Standard Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance
C899-79(2022) Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
C903-15(2020) Standard Practice for Preparing Refractory Specimens by Cold Gunning
C909-18(2022) Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C914-09(2022)e1 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C92-95(2022)e1 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
C973-87(2020) Standard Practice for Preparing Test Specimens from Basic Refractory Gunning Products by Pressing
C974-87(2020) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C975-87(2020) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C987-10(2019) Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures
D2652-22 Standard Terminology Relating to Activated Carbon
D2854-09(2019) Standard Test Method for Apparent Density of Activated Carbon
D2862-16(2022) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
D2866-11(2018) Standard Test Method for Total Ash Content of Activated Carbon
D2867-23 Standard Test Methods for Moisture in Activated Carbon
D3466-06(2018) Standard Test Method for Ignition Temperature of Granular Activated Carbon
D3467-04(2020) Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
D3802-16 Standard Test Method for Ball-Pan Hardness of Activated Carbon
D3803-91(2022) Standard Test Method for Nuclear-Grade Activated Carbon
D3838-05(2017) Standard Test Method for pH of Activated Carbon
D3860-98(2020) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
D4069-95(2020) Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
D4607-14(2021) Standard Test Method for Determination of Iodine Number of Activated Carbon
D5029-98(2020) Standard Test Method for Water Solubles in Activated Carbon
D5158-23 Standard Test Method for Determination of Particle Size of Fine Mesh and Powdered Activated Carbon by Air-Jet Sieving
D5159-21 Standard Guide for Dusting Attrition of Granular Activated Carbon
D5160-95(2019) Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
D5228-16 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
D5742-16 Standard Test Method for Determination of Butane Activity of Activated Carbon
D5832-98(2021) Standard Test Method for Volatile Matter Content of Activated Carbon Samples
D5919-96(2022) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
D6385-22 Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing
D6586-03(2021) Standard Practice for the Prediction of Contaminant Adsorption on GAC in Aqueous Systems Using Rapid Small-Scale Column Tests
D6646-03(2022) Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
D6647-18 Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
D6781-02(2021) Standard Guide for Carbon Reactivation
D6851-20 Standard Test Method for Determination of Contact pH with Activated Carbon
D7385-21 Standard Guide for Estimating Carbon Saturation by Temperature Rise Upon Immersion
D8176-18 Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)
해외규격 구입문의 : 한국표준정보원 02-2068-1430
댓글