ASTM 핸드북 Section 4-11권
ASTM Volume 04.11: Building Constructions (I): E72 – E2166(건물 구조 (I) : E72 – E2166)
도서 내 규격수 : 150종
발행월 : 11월
세부목록 :
E1057-15(2020)e1 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
E1074-15(2020)e1 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
E1091-21 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
E1105-15(2023) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
E1121-15(2020)e1 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
E1155-20 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
E1185-15(2020)e1 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
E1186-22 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
E1190-21 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
E1233/E1233M-14(2021) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
E1258-88(2018) Standard Test Method for Airflow Calibration of Fan Pressurization Devices
E1300-16 Standard Practice for Determining Load Resistance of Glass in Buildings
E1307-18 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
E1369-15(2020)e1 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
E1399/E1399M-97(2022) Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
E1423-21 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
E1424-22 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1425-14(2023) Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
E1480-92(2022) Standard Terminology of Facility Management (Building-Related)
E1481-00a(2021) Standard Terminology of Railing Systems and Rails for Buildings
E1486-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
E1486M-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
E1509-22 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
E1512-01(2015) Standard Test Methods for Testing Bond Performance of Bonded Anchors
E1513/E1513M-93(2020) Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E1514-98(2017)e1 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
E154/E154M-08a(2019) Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
E1554/E1554M-13(2018) Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
E1555-20 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
E1556-20 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
E1557-09(2020)e1 Standard Classification for Building Elements and Related Sitework—UNIFORMAT II
E1592-05(2017) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
E1602-03(2017) Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
E1612/E1612M-94(2022) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
E1637-98(2017)e1 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
E1643-18a Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
E1646-95(2018) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
E1660-95a(2018) Standard Classification for Serviceability of an Office Facility for Support for Office Work
E1661-95a(2018) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
E1662-95a(2018) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
E1663-22 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
E1664-19 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
E1665-95a(2018) Standard Classification for Serviceability of an Office Facility for Facility Protection
E1666-95a(2018) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
E1667-95a(2018) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
E1668-95a(2018) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
E1669-95a(2018) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
E1670-95a(2018) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
E1671-95a(2018) Standard Classification for Serviceability of an Office Facility for Cleanliness
E1677-19 Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls
E1679-13(2019) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
E1680-16(2022) Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
E1692-95a(2018) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
E1693-95(2018) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
E1694-22 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
E1699-14(2020) Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes
E1700-16 Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
E1701-95(2018) Standard Classification for Serviceability of an Office Facility for Manageability
E1730-19 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
E1745-17 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
E1748-95(2017) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
E1749-18 Standard Terminology Relating to Rigid Wall Relocatable Shelters
E1765-16e1 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes
E1773-18 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
E1783/E1783M-96(2017) Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
E1793-19 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
E1794-22a Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200 °F Elevated Humidity Service), Type II Panels
E1800-21 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160 °F Elevated Humidity Service), Type I Panels
E1801-21 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
E1803-14(2022) Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels
E1804-16 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
E1825-21 Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems
E1826-20 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
E1827-22 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
E1836/E1836M-09(2016) Standard Practice for Building Floor Area Measurements for Facility Management
E1851-21 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
E1857-97(2021) Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
E1886-19 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
E1925-18 Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures
E1946-18 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
E196-06(2018) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
E1974-19 Standard Specification for Shelter, Electrical Equipment S-250/G
E1975-22 Standard Specification for Shelter, Electrical, Equipment S-280/G
E1976-19 Standard Specification for Shelter, Tactical, Nonexpandable
E1977-18 Standard Specification for Shelter, Tactical, Expandable, One-Side
E1978-18 Standard Specification for Shelter, Tactical, Expandable, Two-Side
E1993/E1993M-98(2020) Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
E1996-20 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
E1998-11(2018) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
E2004-18 Standard Test Method for Facing Cleavage of Sandwich Panels
E2013-20 Standard Practice for Developing Functions, Constructing FAST Diagrams, and Performing Function Analysis During Value Engineering (VE)/Value Analysis (VA) Study
E2026-16a Standard Guide for Seismic Risk Assessment of Buildings
E2029-11(2019) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
E2068-00(2022) Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
E2083-05(2016) Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit
E2098/E2098M-13(2018) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
E2099-00(2014)e1 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
E2103/E2103M-19 Standard Classification for Bridge Elements—UNIFORMAT II
E2110-17 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
E2112-19c Standard Practice for Installation of Exterior Windows, Doors and Skylights
E2121-21 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
E2126-19 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
E2127-01a(2022) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
E2128-20 Standard Guide for Evaluating Water Leakage of Building Walls
E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
E2140-01(2017) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
E2141-21 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
E2150-17 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
E2166-16 Standard Practice for Organizing and Managing Building Data
E241-20 Standard Guide for Limiting Water-Induced Damage to Buildings
E283/E283M-19 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E330/E330M-14(2021) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
E331-00(2023) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
E405-04(2018) Standard Test Methods for Wear Testing Rotary Operators for Windows
E455-19 Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
E488/E488M-22 Standard Test Methods for Strength of Anchors in Concrete Elements
E529-04(2018) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
E546-14(2020) Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
E547-00(2016) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
E564-06(2018) Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
E575-05(2018) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
E576-14(2020) Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
E605/E605M-19 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E631-15 Standard Terminology of Building Constructions
E661-22 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
E695-22 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
E72-22 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
E73-13(2021) Standard Practice for Static Load Testing of Truss Assemblies
E736/E736M-19(2023) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
E741-11(2017) Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
E754-80(2022) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
E759/E759M-92(2023) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
E760/E760M-92(2020) Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
E761/E761M-92(2020) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
E779-19 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
E783-02(2018) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
E833-14(2021) Standard Terminology of Building Economics
E859/E859M-93(2020) Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
E864-20 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E865-20 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
E866-19 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E874-19 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E894-18 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
E917-17e1 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
E935-21 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
E937/E937M-93(2020) Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E964-15(2020)e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
E987-88(2017) Standard Test Methods for Deglazing Force of Fenestration Products
E990-21 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
E997-15(2021) Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing
E998-19 Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads
해외규격 구입문의 : 한국표준정보원 02-2068-1430
댓글